Electrical Control Panel Manufacturer in India

Control panel solutions for industrial applications

Electrical control panels sit between the incoming LT distribution and the equipment a plant actually runs on. Accu-Panels builds control panels for process plants, pumps and pumping stations, HVAC and chiller plants, water and wastewater treatment, material handling and conveyors, compressors, utilities and infrastructure projects. On the renewable side the same engineering covers solar balance-of-system needs — inverter-side AC distribution, 800 V LT panels and DG–solar synchronising — and EV charging infrastructure. Whatever the application, the panel is designed around the protection philosophy, control voltage, communication requirement and site conditions defined in your project documents, so that it integrates cleanly with existing switchgear, PLC/SCADA systems and downstream distribution.

Available electrical control panel configurations

PLC and automation control panels

Panels built around a programmable logic controller, HMI, relays, I/O modules and marshalling for process automation and machine control. PLC make, I/O count and communication protocol follow your specification [VERIFY: list supported PLC/HMI makes and protocols].

Motor control and starter panels

Fixed or drawout motor control centres (MCC) with DOL, star-delta and feeder modules, including fully drawout MCC panels for zero-downtime maintenance and intelligent MCC (IMCC) with communicating motor protection.

VFD and soft starter panels

VFD and soft-starter panels for pumps, fans, compressors and conveyors, with bypass, harmonic-mitigation and cooling arrangements defined by the duty.

Automatic changeover and AMF panels

Auto changeover (ATS) panels for mains–DG transfer and AMF panels that start the generator automatically on mains failure and restore supply on return.

Synchronizing and DG control panels

Synchronizing panels for DG–DG, DG–grid and DG–solar operation with load sharing and protection, including the DG–solar PV synchronising arrangement used on hybrid plants.

Custom control panels based on project drawings

Where the application does not fit a standard type — special-purpose machines, utility interfaces, test benches, remote I/O or marshalling panels — the panel is built directly from your control philosophy, SLD and wiring schedule.

Engineering inputs required for panel design

None of these are mandatory to start a conversation, but together they let the team prepare a suitable technical proposal quickly:

• Single-line diagram (SLD) — incomer, feeders, ratings and protection scheme
• Load schedule — connected and running loads, diversity, future spare
• Motor list — kW, starting method, duty, control mode (local / remote / auto)
• Control philosophy — interlocks, sequences, alarms, PLC/SCADA signals, control voltage
• Site environment and installation conditions — indoor / outdoor, ambient temperature, dust, humidity, cable entry, available space
• Required drawings and documentation — GA, schematics, terminal plans, BOM, routine-test reports and any customer-specific formats

What to evaluate when selecting a control panel manufacturer

• Application fit — has the manufacturer built panels for your process, motor sizes and duty before?
• Protection philosophy — how incomer, feeder and motor protection are coordinated, and whether type-2 coordination charts are provided.
• Component selection — switchgear, relays, drives and PLC makes that match your approved-vendor list and are serviceable locally.
• Maintenance access — module layout, door clearances, drawout or fixed construction, spare ways.
• Wiring identification and documentation — ferruling, colour codes, terminal numbering and as-built drawings that match the panel delivered.
• Testing — routine tests, functional checks and a witnessed factory acceptance test before dispatch.
• Enclosure conditions — ingress protection, ventilation or cooling, corrosion protection for the installed environment.
• Future expansion — busbar and space reserve, and the ability to add feeders without a rebuild.

Related electrical panel solutions

• MCC panels — motor control centres, fixed and drawout
• PCC panels — power control centres up to 6300 A
• VFD and soft starter panels
• AMF panels and auto changeover panels
• Synchronizing panels
• LT panels and power distribution boards
• Types of electrical panels in India — a buyer’s guide
• Contact the Accu-Panels engineering team

Frequently asked questions

What information is needed to specify an electrical control panel?

An SLD, load schedule or motor list, the control philosophy (interlocks, sequences, signals to PLC/SCADA), the control voltage and the site conditions. If some of these are not ready, share what you have and the team will list what is still needed.

Can a control panel be designed from an SLD or BOQ?

Yes. Most projects start from an SLD or a consultant’s BOQ. The team converts these into a GA drawing, schematics and a component list for your approval before manufacturing begins.

What is the difference between an electrical control panel and a power panel?

A power panel (PCC or LT panel) receives and distributes power from the transformer or DG to sub-panels and heavy loads. A control panel operates, protects and monitors specific equipment — motors, drives, automation loops — and is usually fed from that power panel. Many plants use both; see what are MCC and PCC panels.

Can control panels include PLC, relay logic, VFD or soft-starter controls?

Yes. Panels are configured with PLC/HMI automation, conventional relay logic, VFD or soft-starter feeders, or a combination, according to the control philosophy and motor list.

What factors affect electrical control panel cost?

Rated current and fault level, the number and type of feeders or starters, drive and PLC content, component makes on the approved-vendor list, form of separation, enclosure IP rating and material, and the documentation and testing scope. A firm price follows a reviewed SLD and load list rather than a generic estimate.

How can I request a technical proposal from Accu-Panels?

Use the contact page to share your SLD, BOQ, load schedule, motor list or control requirement. The engineering team reviews the inputs and returns a technical proposal for discussion.

Share your SLD, BOQ, load schedule or control requirement with Accu-Panels to discuss a suitable electrical control panel configuration.

Request a technical proposal