Synchronising panel the name itself describes its role once you link with power Source. Means to match, adjust with two or more power magnitude levels. The demand of synchronising panels comes into action where power continuity is at priority level. In the conclusion, Synchronizing panels is the most important part for critical production industries in LT Panels. Accu panels have proper guideline and specification selection for correct synchronization with grid and dg or pv-dg synchronization. By proper Setting of Synchronizing relay and set up of all related data like voltage, ampere, frequency, power factor etc. It can synch DG set load sharing with main power to reduce power consumption from the utility supply.
What is Solar and DG Synchronising?
In an alternating current electric power system, solar synchronizing panel is the process of matching the speed and frequency of a generator or other source to a running network. An AC generator cannot deliver power to an electrical grid unless it is running at the same frequency as the network. unc eu euismod nulla, sit amet dignissim risus. Mauris vitae suscipit ante.
When driving power to the grid, grid-tied inverters must provide a stable, sinusoidal AC waveform that matches grid voltage and frequency according to utility standards. Poor synchronization can lead to load imbalances, damage to connected equipment, instability in the grid, and even power outages in the grid itself.
What Is Synchronizing Panel?
Synchronizing panel The name itself describes its role when you link with power Source. Means – To compare, match, adjust with two or more power magnitude levels. Demand of synchronising panels comes into action where power continuity is at priority level. In Conclusion, Synchronising panels is the most important part for critical production industries in LT Panels
Features Of Solar Synchronizing Panel
- Advanced as well as reliable control module
- Full range protection function, and alarm shutdown feature
- Synchronizing relays Woodward/Stucke/DEIF/Deepsea.
- Power Generation Continuity
- Protection class of IP52/IP55/IP65.
- Ratings upto 6000A.
- Generator and grid electricity Board feeder for AMF function.
- Both Active and reactive power load sharing and avoids overloading of either system.
Principle Of Operation
All Power sources connected to common busbars using motorised circuit breakers or Air circuit breakers. Whenever main grid supply fails, Synchronizing relay comes into action and give control signal to alternate sources. So DG connected to common busbars. After that initial warmup DG starts and allowed to rotate on full speed.
Protection Level
Firstly, all indoor panels have protection of IP54 or better even more all outdoor panels have protected with IP65 or better. Secondly, all PCC Panels made by laser cutting CRCA sheet and powder coating with 7-Tank process
Leave a comment